Meridian Audio DVP1500 User Manual download pdf (Page 10)

OSD Timer

0-255 (30 default)

LCD Timer

6-255 (40 Default)

Note: setting the timer to 5 or lower sets the LCD

backlight to Always On.

Set: RS232 Echo

On (Default) /Off

Allows RSR232 characters to be sent back to

the controller.

Set: Restore Factory

Are You Sure? - Press Enter Key

Use this Function only in the event that

the processor no longer functions properly and

all other system checks have been performed.

This command will erase all custom settings

and restore the original firmware configuration.

Be sure to go back through the Setup procedure

for proper operation.

The next step in the setup procedure is to align the

display device. Be sure to follow all

directions for setting up the display found

in the display’s manual. Using a test DVD

with the Safe Area test pattern, align the image

size, position and blanking first using the controls

found in the display device. Only use these controls

in the DVP1500 if the display device does not offer

these controls or if there is not enough range.

IR REMOTE AND

OSD OPERATION

The DVP1500 is shipped with a Infrared remote

control that allows for direct access to most

commands used to control the processor.

Adjustments can be made by either pressing the

appropriate button on the remote or by toggling

through the On-Screen-Display (OSD).

This is a learning remote that contains the codes for

Faroudja processors and display systems. The

remote can be programmed to handle other devices

as well. See the separate manual for instructions on

programming this remote.

ON SCREEN DISPLAY (OSD)

Accessing the OSD

• Press Menu button to bring up main Index.

• Use Function Up/Down Keys until the triangle

at the top of the OSD turns yellow.

• Use the Left/Right keys to move to the next

menu page. A list of available Functions

will appear.

• Press Function Up/Down keys to select

an adjustment.

• Use Value Left/Right keys to adjust.

The main menu drops away and a single

line menu appears.

• Use the Function keys to return to the drop

down menu.

• The OSD will time out after 8 seconds.

Note: Unused inputs can be deactivated for simpler

operation of the processor. See the Setup

instructions for details.

IR REMOTE / OSD

Touch screen panel

Function / Value Keys

Store / Enter Key

The remote has four screens with the different commands.

Number pad: allows

for entering specific

level numbers

(Contrast + ###),

or access to added

Profiles P7 & P8

(Profiles + 7 or 8).

Access OSD Menu

Select Inputs

Note: Press the

DVD key two

times to select

Recall Profiles

Note: To recall a

profile, Press

Profile + P1-P6

Press Profile + Fact Recall to

reset picture level settings to

the factory position.

Aspect Ratio select

Image Adjustments

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 51 52

Comments to this Manuals

No comments

Meridian Audio DVP1500 User Manual Page 10

Comments to this Manuals