Meridian Audio SRC-2010 User Manual download pdf (Page 56)

Appendix BAppendix B

Troubleshooting

If you have trouble configuring or operating the SRC-2010, first check that you have

inserted the batteries correctly (page 8). Then check the items below.

Symptom Remedy

The SRC-2010

doesn’t operate your

device.

• Move closer to the device. The maximum

operating distance is approximately 10 me-

ters.

• Ensure that you are aiming the SRC-2010

directly at the device and that there are no

obstructions between the SRC-2010 and

the device.

• Ensure that you have used the learning

function (page 23) to configure the device.

• Make sure that the desired device on the

SRC-2010 LCD panel has been selected.

You cannot operate a

device even after con-

figuring the device

using the learning

function (page 23).

• Make sure that you have correctly “mapped”

your device’s remote control to the SRC-

2010.

• Clear the device data from the SRC-2010

(page 26) and carry out the learning func-

tion again (page 23).

You see an “error”

display during the

learning procedure.

• Try the learning procedure again (page 23).

You see an “error”

display during opera-

tion.

• The button that you pressed has not been

configured. Configure the button using the

learning procedure (page 23).

The LCD screen

turns off.

• The SRC-2010 is preset at the factory to

automatically switch the LCD off after 25

minutes if left unused. Just press the

Hardware Access Button to turn the

SRC-2010 back on again.

1 2 ... 51 52 53 54 55 56

Comments to this Manuals

No comments

Meridian Audio SRC-2010 User Manual Page 56

Comments to this Manuals